Wi-Fi Signal Troubleshooting

ByMike Moffit

Pretty regularly, customers will bring in a Mac that is intermittently dropping its Wi-Fi signal. This is a very frustrating issue, and it can also be a difficult one to diagnose. Every basic home network setup is different in that the environment, the hardware used, the ISP and the amount of load/strain can all vary. All these factors must be considered to produce a solution.

Nine times out of ten, this issue is not replicable on our service department Wi-Fi network, and therefore cannot be definitively diagnosed. Sometimes, changing basic network settings within System Preferences will resolve the issue, but that’s not always enough. Often, the best troubleshooting of wireless issues involves doing the work while the machine is in its home environment. That means either doing it yourself and doing the research, or hiring someone to attempt to resolve the issue for you, be it via an on-site visit or phone support.

So what do you do when you have done pretty much everything? One possible resolution for a slightly more advanced user is to adjust the size of something called the MTU, or Maximum Transmission Units. The MTU determines the maximum amount of data each packet can carry through the network. 1500 is typically the default for most Macs, and also the largest allowed by most basic networks. This means up to 1500 bytes can be carried in each packet over the network.

Generally, the larger the MTU size, the better your network efficiency, and I think Apple would agree with that, considering their default size is the maximum usually allowed. However, in some cases, the MTU size set on the computer can conflict with the some aspect of the network, causing it to intermittently lose its signal. This can be resolved by altering the MTU size slightly within Terminal.

As always, use your best judgement when playing around in Terminal. Things can quickly go from good to bad if you you don’t know what you are doing. Now, with the usual disclaimer out of the way, follow these directions.

Open a Terminal window and type:

  • networksetup -getMTU en0
  • hit Return

Note: You may need to type en1 instead; it depends on which connection you are using. You can find out using Network Utility. This will tell you your current MTU size.

To change the size, type:

  • networksetup -setMTU en0 XXXX(new size)
  • hit Return

You can input whatever size you want; I would recommend keeping it relatively close to the original MTU size. For example: 50 fewer units (1500->1450). This setting is easy enough to change and test as part of your troubleshooting. Nothing is permanent, as you can easily change the MTU size back to what it was originally (using the aforementioned command) if this does not resolve your issue.

Similar Posts

  • Time Capsule Hard Drive Upgrades

    Apple’s Time Capsule was released in 2007 in 500GB and 1TB capacities which were, at the time, sufficiently capacious to accommodate backups of…

  • Practice safe downloading

    The news and blogoshere was wild reporting on the first Trojan horse to affect Mac OS X 10.4 (Tiger) named Leap-A. This has…

  • Backing Up vs Data Recovery Costs

    One of the toughest things a technician has to do is tell customers that their hard drive has failed and recovering the data will likely cost thousands of dollars. A Small Dog customer brought in her 24-inch iMac earlier this month because it would not start up. It was on the bench and diagnosed as a failed hard drive a few hours later, and we contacted her with a few options: replace the hard drive under warranty and return the failed drive to Apple, or send the drive to DriveSavers for professional recovery.

    DriveSavers is widely acknowledged as the most capable and best-equipped data recovery firm in the world, and our customer was happy to receive an external hard drive with 100% of her data mere days after sending in the toasted one. She was not happy about the bill, though, which was more than the cost of her computer!

    We spoke at length on the phone about how all hard drives fail eventually and how she needs to have a backup system in place. She clearly understood what I was saying, and I made it clear that our conversation was not really about sales but about her protection. No backup drive was purchased.

    Three weeks later, the warranty hard drive replacement has failed again. She didn’t back it up and has lost three weeks of work and simply cannot afford the pricey recovery again.

    David Lerner, an owner of the preeminent New York City Apple Specialist and repair shop Tekserve, has in his email signature “May you have 1,000 backups and never need one.” It’s a mantra we all should take seriously.

    This is just one more sad story about 100% preventable data loss. Do yourself a favor and get a Time Capsule, an external drive, even email important documents to yourself or stash them on your iDisk. A $200 Time Capsule is much cheaper than a $2200 data recovery!

    Do yourself a favor… (be sure to click the green links on the product page to view all specials)
    Time Capsule 500GB from $199.99
    Time Capsule 1TB from $349.99

  • Mac Security Tips

    My last article detailed the arguments for and against anti-virus or anti-malware software on Macs. It turned out to be pretty popular because…