iPad Goes Pro!

ByDon

Apple has released the iPad Pro and some of the first reviews are in. I haven’t had a chance to play with one yet but I think this new iPad pushes Apple into two markets for iPad that it has only brushed before. One is the enterprise market and the other is the creative market. My good friend Dave Sellers, is an architect and I often see him with yellow tracing paper sketching up new designs for whatever harebrained scheme he might be working on. I told him about the new iPad Pro and the Pencil and I know I will want to get that into his hands as soon as possible to see if that old guy can do some magic on this new technology. The business or enterprise market for iPad is blossoming with Apple’s partnership with IBM and Cisco and the iPad Pro is going to push that window even further.

When Apple announced the iPad Pro with its A9X chip, they stated that it would be faster than 80 percent of the PCs that shipped this year. It appears to be true and the $799 base model iPad Pro is faster and more powerful than the $899 Microsoft Surface Pro 4. But speed is not the whole picture. With 5.6 million pixels the 12.9 inch Retina display is the highest resolution of any iOS device. It is a fully laminated display with anti-reflective coating and technologies like Photo Alignment and Oxide TFT to deliver rich contrast, stunning color and deeper blacks.

One would expect the first generation of the iPad Pro to be a bit clunky in size but at just 6.9mm thick and about a pound and a half, it is a very thin and lightweight powerhouse. The iPad Pro features four speakers which will give you amazing sound and more than three times the sound output of any iPad. The speakers are orientation savvy so whether you are in landscape or portrait mode the low frequencies play on all four speakers and the higher frequencies play for the top.

iOS 9 was built for the iPad Pro and this new iPad takes advantage of the multitasking, split view, picture-in-a-picture, Siri and Spotlight search capabilities of iOS9. Touch ID makes your new iPad Pro more secure and easy to use and with iSight and FaceTime cameras those of you that like to take photos with a giant iPad can do so.

The Smart Keyboard is probably the feature that might make this iPad replace a Mac for some. It is a full size keyboard that is water and stain resistant and very thin. It does not require Bluetooth and connects via the iPad Pro’s Smart Connector. This provides a connection for both power and data. It is not just some third-party keyboard paired to the iPad Pro; this Apple-designed keyboard is fully integrated into the iPad Pro and iOS9. Steve Jobs once said that he saw no need for a stylus because we all have ten pointing devices, called fingers. I don’t think he rolled over in his grave when Apple introduced the Pencil because it is not designed to be a pointing device but rather as a drawing device. It is weighted but won’t roll off the desk and the Pencil is sensitive to both tilt and pressure allowing your creative impulses to flow from the thinnest line to deep shading. I am no artist but I can’t wait to see some of the digital art produced with the combination of the iPad Pro and the new Pencil.

I hope to give you some first-hand feedback soon on this new member of the iPad family!

Similar Posts

  • Keychain Access, an Essential Tool

    I have been doing more onsite installations and lessons down here in Key West. So many times as I start to help a…

  • My Thoughts on the AppleTV

    When Steve Jobs announced the new AppleTV on September 1st, 2010 I looked at my wife and said “My first free $100 is…

  • Fody Personal Weather Station: A Review

    When I saw that we had started to carry the Fody Tempus Pro Bluetooth weather station, I was immediately interested. At my apartment, I had a really old, pretty cheap, wireless thermometer I was using to help me figure out how to dress myself for the conditions outside. You know, t-shirt, sweater, jacket, full Antarctica-grade parka…it is Vermont after all. The problem I always had with it was that the remote sensor couldn’t get wet, and there just weren’t many places I could put it. Last year I got a slightly better thermometer base station that used a wired thermocouple that could easily be passed out a closed window. The thermocouple is sealed and can get as wet as you want. That worked a lot better, but the base station features weren’t as good. I didn’t like the way it recorded min/max temperature.

    So when I saw the Tempus Pro, I thought it might be able to solve all of my problems. In addition to indoor/outdoor temperature and indoor humidity, it also records outdoor humidity, rainfall, barometric pressure, windspeed and wind direction. Instead of all that data going to a limited base station, it goes to my iPad, where I can quickly see trends, share it with friends on Twitter or Facebook or just email myself the raw data.

    I had a few concerns such as whether or not the radiation shield on the outdoor temperature sensor would work. You have to install the Tempus Pro in an open location so that wind and rain can be recorded, but this most likely means it’ll be in the sun too, which would completely mess up the temperature reading. The radiation shield actually does an amazing job at preventing that. I haven’t seen any excessively high temperatures recorded even when the station was baking in the sun.

    Setup was very easy for a device that’s actually doing a lot of complicated things. The outdoor station transmits its data to the indoor base station that is plugged into the wall for power. This transmission is probably very basic radio since the range is quite a bit more than is possible with Bluetooth and the outdoor station only uses three included AA batteries. The indoor station uses low-energy Bluetooth to relay indoor and outdoor sensor data with your iOS or Android device.

    Once everything is paired and running (which is easy to do if you follow the order indicated by the instructions), you will see real-time data being displayed on your iOS or Android device via the Fody app. It also builds graphs of historical data so you can watch trends. One of the things I liked most about the app was the alerts feature. I can set high/low alert thresholds for any of the sensors. I set up an alert for when the outdoor temperature falls below freezing. A few times this past week, I was sitting on my couch and heard my iPad chime. It was an alert letting me know it had fallen below freezing outside. Very cool! You could also set other useful alerts for things like excessive rain, or high winds.

    Overall I think the Tempus Pro is a pretty neat device and the simple use and setup belies the actual complexity of having your own personal weather station. If you’ve ever been curious about setting up a personal weather station at home, or just want something a bit more than temperature readings like I did, you won’t be disappointed with the Fody Tempus Pro.

  • iVote. Do You?

    With three months to go until the presidential election, the two major candidates are doing everything they can to get the message out….

  • Here come the controllers!

    When I’m playing a game on my iPhone, there are times where I’m thinking, “you know what?” “actual buttons would make this game…

  • Migrate Your Data to a New Mac

    When a customer buys a new Mac, there’s often a question of what to do about the old data. All that old data is all that stuff that made your old machine yours: it’s the settings, the pictures, saved web page bookmarks, documents, spreadsheets…all that stuff.

    Frequently a Mac-to-Mac data transfer can be done without any special equipment or advanced knowledge. The easiest way is to use Apple’s Migration Assistant which is a program built into OS X, and is on every new Mac. When setting up a new Mac (or any Mac that’s been reset to factory settings, generally from the disk being wiped and the OS being reinstalled) it’ll prompt you to make a decision.

    The top option is to transfer data from a start up disk or Time Machine backup. If you’re already doing a Time Machine backup to an external HDD this is the best option, just make sure your backup is completely up to date. If it’s behind, any changes you’ve made won’t show up on your new machine when the transfer completes. Once you’ve identified the drive you want the data to come from it goes through and calculates the sizes of everything on that older drive. You’ve got a little control of what comes over, like whether or not you want the entire Applications folder, but nothing more specific than that. It’ll also tell you how much available space will be left over, or if there’s more data on the source drive than the destination.

    I recommend using a Time Machine backup drive (any external HDD that has a Time Machine backup on it) because it’ll be useful for backups on the new machine. It’ll even see that it’s a new machine that has all the same data and ask if you want to keep using the same Time Machine backup; this is call inheriting.

    Alternatively, you can put the source machine into Target Disk Mode by pressing the T key when the machine is booting and having it connected to the destination machine through Thunderbolt or FireWire. Target disk mode only works through Thunderbolt and FireWire, don’t bother trying anything else. I’ve wasted enough time for us all: it’s not supported. If you’re transferring data from a machine with FireWire but no Thunderbolt to a new Mac that only has Thunderbolt you can get a Thunderbolt to Firewire adapter, but that’ll run you $30 and you might not have another use for it after the data migration. You could also use a Thunderbolt cable, but that’ll also run you at least $30, and again, you might not have another use for it, that’s why I recommend an external HDD. If you’re not doing a backup, it’s worth the peace of mind, and simplifies data transfers.