iPad 2 Setup Issues

ByMike Moffit

iPad 2 is here! Most of what we’ve heard from our customers is very positive, and people absolutely love their new toy. As with any new device, however, we occasionally get a call from someone who can’t get their iPad to work with their computer. Most of the time, the issue falls into one of the following categories.

USB port: iPad, as with other recent devices, requires connection to a USB 2.0 port to sync with iTunes. If your system has legacy USB 1.x ports, iTunes won’t see the device. If you’re not sure, check System Profiler (Mac) or Device Manager (Windows). Another thing to watch for is if you’re plugging the device into an unpowered USB hub; the device will turn on and show the Connect to iTunes graphic, but it won’t appear under Devices in iTunes. Plug it directly into the computer to ensure there is enough power to detect the device.

Non-current version of iTunes: All current iDevices require iTunes 10, but for iPad 2 you must have at least 10.2. If you use a Windows system, click Help > About iTunes to find out if you’re up to date. On a Mac, click iTunes > About iTunes. If you have an earlier version than 10.2.1, check that same menu for a Check for Updates selection and see if a new version is available. If so, download and install it, then try your device again.

Your system doesn’t support iTunes 10: Depending on the version of the OS you have, you may not be able to install iTunes 10. Your only option here is to upgrade your operating system. For Windows, you must have XP Service Pack 3. For Mac OS X, you need 10.5.8 or higher. Also keep in mind that iTunes 10 may need more memory than your system has installed – you can get by with 512MB RAM, but to take full advantage of the content, you should have 1GB or more.

For extensive troubleshooting information, give us a call or check out Apple’s iPad support page.

Similar Posts

  • PhotoBook

    If you’re not aware of FaceBook yet, well get out from the rock you’re under and have a peek at FaceBook.com. It started…

  • Canned Air and FileVault

    by Matt, matt@smalldog.com The Internet is abuzz with a story about freezing RAM to “capture” its contents in order to obtain encryption keys….

  • Where are my Nike iPod Shoes?

    According to Apple, the latest iTunes update, to iTunes 6.0.5, ”…allows you to sync your Nike + iPod workout data to nikeplus.com, where…

  • iPod Games!

    Apple released a several games for the 5th generation iPod a while back but I’ve finally got the chance and time to try…

  • AppleCare…To the Rescue

    While Apple’s products have significantly lower rates of failure than a lot of their competition, things do go wrong from time to time. When I got my iPhone 4S at launch, it would occasionally restart itself. At first, I thought nothing of it, considering I was coming from an Android device that rebooted itself so often that it might as well have been saying, “Hey, just in case you forgot you customized your splash screen, here it is again!”

    A couple of weeks ago, my phone didn’t just restart itself, but became a useless brick until I gave it a hard reset while plugged in. A quick Google search revealed this issue to be a symptom of hardware failure known in the diagnosis log as “panic.plist.” I checked my diagnosis log and there it was, three “panic.plist” occurrences in the past week. After a brief phone call with AppleCare, I was given the choice of sending the phone back to them and waiting close to a week for a replacement or to have a $730 hold placed on my credit card while they sent me a new phone overnight. As I didn’t have another phone to use, I opted for the latter.

    Normally, to have a phone sent overnight would cost $30 but because I had AppleCare, the fee was waived. Cut to today; the hold has been lifted and I have a shiny new iPhone that has yet to give me an issue. Granted, I was within the original one year warranty, but had this happened after that first year, I would be scavenging Craigslist for a cheap replacement. Thanks, AppleCare–I owe you one.