Migrate Your Data to a New Mac

ByMike Moffit

When a customer buys a new Mac, there’s often a question of what to do about the old data. All that old data is all that stuff that made your old machine yours: it’s the settings, the pictures, saved web page bookmarks, documents, spreadsheets…all that stuff.

Frequently a Mac-to-Mac data transfer can be done without any special equipment or advanced knowledge. The easiest way is to use Apple’s Migration Assistant which is a program built into OS X, and is on every new Mac. When setting up a new Mac (or any Mac that’s been reset to factory settings, generally from the disk being wiped and the OS being reinstalled) it’ll prompt you to make a decision.

The top option is to transfer data from a start up disk or Time Machine backup. If you’re already doing a Time Machine backup to an external HDD this is the best option, just make sure your backup is completely up to date. If it’s behind, any changes you’ve made won’t show up on your new machine when the transfer completes. Once you’ve identified the drive you want the data to come from it goes through and calculates the sizes of everything on that older drive. You’ve got a little control of what comes over, like whether or not you want the entire Applications folder, but nothing more specific than that. It’ll also tell you how much available space will be left over, or if there’s more data on the source drive than the destination.

I recommend using a Time Machine backup drive (any external HDD that has a Time Machine backup on it) because it’ll be useful for backups on the new machine. It’ll even see that it’s a new machine that has all the same data and ask if you want to keep using the same Time Machine backup; this is call inheriting.

Alternatively, you can put the source machine into Target Disk Mode by pressing the T key when the machine is booting and having it connected to the destination machine through Thunderbolt or FireWire. Target disk mode only works through Thunderbolt and FireWire, don’t bother trying anything else. I’ve wasted enough time for us all: it’s not supported. If you’re transferring data from a machine with FireWire but no Thunderbolt to a new Mac that only has Thunderbolt you can get a Thunderbolt to Firewire adapter, but that’ll run you $30 and you might not have another use for it after the data migration. You could also use a Thunderbolt cable, but that’ll also run you at least $30, and again, you might not have another use for it, that’s why I recommend an external HDD. If you’re not doing a backup, it’s worth the peace of mind, and simplifies data transfers.

Similar Posts

  • Weekly Apple News Recap | 2/13-2/17

    Apple had some notable news this week (but no, the iPad 3 isn’t out yet): Apple Releases Mountain Lion Developer Preview Apple announced…

  • Diagnosing & Treating Bash "Shellshock"

    OS X is a descendant of a long lineage of UNIX operating systems, from which it inherits its incredible stability and enhanced security….

  • iPhone is #1!

    International Data Corporation (IDC), a technology market research firm with over 1,000 analysts in 50 countries, has released its quarterly report on global…

  • Bouncing Lions

    I love Lion. So far it is my favorite iteration of Mac OS X, but it does have some annoying features. In my internet wanderings yesterday I came across an article with instructions on how to get rid of the rubber-band effect which occurs when you scroll to the very bottom or top of a page. This effect will make the page scroll a little bit past the end point then bounce back. It’s a nice little bit of eye-candy, but not really necessary.

    You can easily turn this effect off by entering a simple Terminal command (which I’ll list below) and then press “enter”. As always, do this at your own risk. Mucking about in Terminal can cause irreparable harm to your OS if you do something you shouldn’t. Make sure you have a good backup before you make any changes like this to your system. Here’s the text you need to enter:

    defaults write -g NSScrollViewRubberbanding -int 0

    You can revert to the original setting by entering the following and then press enter:

    defaults delete -g NSScrollViewRubberbanding

    You’ll need to relaunch any applications that display the rubber-banding in order for this to take effect. Unfortunately, it will not affect Safari. Should I find a way to get rid of the rubber-band in Safari, I’ll update this article.

    You can read the original article here.

  • iVote. Do You?

    With three months to go until the presidential election, the two major candidates are doing everything they can to get the message out….