Fody Personal Weather Station: A Review

ByMike Moffit

When I saw that we had started to carry the Fody Tempus Pro Bluetooth weather station, I was immediately interested. At my apartment, I had a really old, pretty cheap, wireless thermometer I was using to help me figure out how to dress myself for the conditions outside. You know, t-shirt, sweater, jacket, full Antarctica-grade parka…it is Vermont after all. The problem I always had with it was that the remote sensor couldn’t get wet, and there just weren’t many places I could put it. Last year I got a slightly better thermometer base station that used a wired thermocouple that could easily be passed out a closed window. The thermocouple is sealed and can get as wet as you want. That worked a lot better, but the base station features weren’t as good. I didn’t like the way it recorded min/max temperature.

So when I saw the Tempus Pro, I thought it might be able to solve all of my problems. In addition to indoor/outdoor temperature and indoor humidity, it also records outdoor humidity, rainfall, barometric pressure, windspeed and wind direction. Instead of all that data going to a limited base station, it goes to my iPad, where I can quickly see trends, share it with friends on Twitter or Facebook or just email myself the raw data.

I had a few concerns such as whether or not the radiation shield on the outdoor temperature sensor would work. You have to install the Tempus Pro in an open location so that wind and rain can be recorded, but this most likely means it’ll be in the sun too, which would completely mess up the temperature reading. The radiation shield actually does an amazing job at preventing that. I haven’t seen any excessively high temperatures recorded even when the station was baking in the sun.

Setup was very easy for a device that’s actually doing a lot of complicated things. The outdoor station transmits its data to the indoor base station that is plugged into the wall for power. This transmission is probably very basic radio since the range is quite a bit more than is possible with Bluetooth and the outdoor station only uses three included AA batteries. The indoor station uses low-energy Bluetooth to relay indoor and outdoor sensor data with your iOS or Android device.

Once everything is paired and running (which is easy to do if you follow the order indicated by the instructions), you will see real-time data being displayed on your iOS or Android device via the Fody app. It also builds graphs of historical data so you can watch trends. One of the things I liked most about the app was the alerts feature. I can set high/low alert thresholds for any of the sensors. I set up an alert for when the outdoor temperature falls below freezing. A few times this past week, I was sitting on my couch and heard my iPad chime. It was an alert letting me know it had fallen below freezing outside. Very cool! You could also set other useful alerts for things like excessive rain, or high winds.

Overall I think the Tempus Pro is a pretty neat device and the simple use and setup belies the actual complexity of having your own personal weather station. If you’ve ever been curious about setting up a personal weather station at home, or just want something a bit more than temperature readings like I did, you won’t be disappointed with the Fody Tempus Pro.

Similar Posts

  • iPad Goes Pro!

    Apple has released the iPad Pro and some of the first reviews are in. I haven’t had a chance to play with one yet but I think this new iPad pushes Apple into two markets for iPad that it has only brushed before. One is the enterprise market and the other is the creative market. My good friend Dave Sellers, is an architect and I often see him with yellow tracing paper sketching up new designs for whatever harebrained scheme he might be working on. I told him about the new iPad Pro and the Pencil and I know I will want to get that into his hands as soon as possible to see if that old guy can do some magic on this new technology. The business or enterprise market for iPad is blossoming with Apple’s partnership with IBM and Cisco and the iPad Pro is going to push that window even further.

    When Apple announced the iPad Pro with its A9X chip, they stated that it would be faster than 80 percent of the PCs that shipped this year. It appears to be true and the $799 base model iPad Pro is faster and more powerful than the $899 Microsoft Surface Pro 4. But speed is not the whole picture. With 5.6 million pixels the 12.9 inch Retina display is the highest resolution of any iOS device. It is a fully laminated display with anti-reflective coating and technologies like Photo Alignment and Oxide TFT to deliver rich contrast, stunning color and deeper blacks.

    One would expect the first generation of the iPad Pro to be a bit clunky in size but at just 6.9mm thick and about a pound and a half, it is a very thin and lightweight powerhouse. The iPad Pro features four speakers which will give you amazing sound and more than three times the sound output of any iPad. The speakers are orientation savvy so whether you are in landscape or portrait mode the low frequencies play on all four speakers and the higher frequencies play for the top.

    iOS 9 was built for the iPad Pro and this new iPad takes advantage of the multitasking, split view, picture-in-a-picture, Siri and Spotlight search capabilities of iOS9. Touch ID makes your new iPad Pro more secure and easy to use and with iSight and FaceTime cameras those of you that like to take photos with a giant iPad can do so.

    The Smart Keyboard is probably the feature that might make this iPad replace a Mac for some. It is a full size keyboard that is water and stain resistant and very thin. It does not require Bluetooth and connects via the iPad Pro’s Smart Connector. This provides a connection for both power and data. It is not just some third-party keyboard paired to the iPad Pro; this Apple-designed keyboard is fully integrated into the iPad Pro and iOS9. Steve Jobs once said that he saw no need for a stylus because we all have ten pointing devices, called fingers. I don’t think he rolled over in his grave when Apple introduced the Pencil because it is not designed to be a pointing device but rather as a drawing device. It is weighted but won’t roll off the desk and the Pencil is sensitive to both tilt and pressure allowing your creative impulses to flow from the thinnest line to deep shading. I am no artist but I can’t wait to see some of the digital art produced with the combination of the iPad Pro and the new Pencil.

    I hope to give you some first-hand feedback soon on this new member of the iPad family!

  • Zoom and Voiceover in iOS

    Working at the Service Check-in Counter, I often have customers asking me how to get out of Zoom and/or Voiceover on their iOS devices. While most people have Zoom and Voiceover disabled, it still shows up now and again.

    If you have used Zoom, the image to the right may seem familiar. If this happens, you can try to enter your passcode and navigate to Settings to turn off Zoom but this can be difficult. An easier way out is a simple 3 finger tap twice which will Zoom you back out.

    If you have seen the image above, then you also must have experienced Voiceover. Instead of using your finger to select individual apps, the screen is sectioned into rectangles, and you select that shape as whole. It is very hard to navigate, and the whole time a voice is instructing your movement. Voiceover is helpful for the visually impaired, but can be a hinderance if turned on. You must navigate back to Settings > Accessibility and turn Voiceover off if you do not wish to use it. If you have the shortcut enabled, you can try triple clicking the home button. This will turn off Voiceover. I would recommend turning off both Zoom and Voiceover, unless of course you need them and are familiar with their commands.

  • Electronic Signing Made Easy

    I was at a customer’s office the other day helping to set up their new Mac system. It was a busy construction company and they needed help getting wireless scanning operational. I noticed that they were using Adobe Reader for their PDF files, so I introduced them to “*Preview*”:https://support.apple.com/en-us/HT201740. Once I set the Finder to open PDF files with Preview instead of Reader, I showed them how to access the scanner to scan documents right from Preview.

    As I had them practice this, I noticed that much of their scanning needs were for documents that they would print out, sign, scan and then email to clients. When I showed them how to use the “signature” function in Preview they immediately saw the value and time saved. So, I know many of you already know how to use this tool, but I thought I would go over it so you too can use your electronic signature.

    Preview is used to view and edit PDFs and images, import images from a camera, import documents and images from a scanner, add pages to a PDF and also to take screen shots. When you have a PDF that needs your signature, the old way of doing this would be to print out the PDF, sign it, scan it and send it back. With Preview you can skip some of that work. You can capture your signature using your trackpad or better yet, using your camera on your Mac.

    ! Annotate > Signature > Manage Signatures*. When you select *Create Signature* you have a choice of trackpad or camera. While signing on your trackpad is okay, I prefer the camera method. Here you take a white piece of paper and sign it. Then click on *Camera* as the means of capturing your signature and hold up that piece of paper to the camera on your Mac. Once you align the signature on the blue line you can hit *Done* and your signature is stored. If you don’t like the first try, click *Clear* and do over.

    To add your signature to a PDF document click on the *Sign* button !http://blog.smalldog.com/images/4295.png! or use the path *Tools > Annotate > Signature* to select the signature. Once it has been placed on the document you can drag it to where you want it, then use the handles to adjust its size. Save the document and you can include it in an email with your signature. Remember that the *Save As* command is sort of hidden now but to get to it simply hold down the *Option key* when you select *File.*

  • A Candle-Powered iPhone?

    If you’ve been reading Kibbles and Bytes over the past few months, you might have noticed I’ve written more than once about power…

  • iPhone is #1!

    International Data Corporation (IDC), a technology market research firm with over 1,000 analysts in 50 countries, has released its quarterly report on global…